Router settings

Caution

Skip this section if you are using the Cloud version of Yeastar

To connect the telephony module with your Yeastar IP PBX Appliance and Software versions, you need a static IP-address and the following ports should be forwarded through NAT to PBX:

Note

You don’t need to open all three ports. Open one port at a time, depending on your on your chosen connection method (FQDN/http/https)

Port	Protocol	Source IP	Text
443	TCP	185.47.152.82	If you have an active Yeastar subscription and used Yeastar FQDN
8088	TCP	185.47.152.82	If you selected the HTTPS protocol in the PBX settings
80	TCP	185.47.152.82	If you selected the HTTP protocol in the PBX settings

Danger

Safety notes! We recommend opening these ports only for IP-address of the telephony server
185.47.152.82

Interface of settings of ports forwarding differs depending on the router used in your network. You can find the current manual on port forwarding for your router on the internet.